AMXX PROFI
Hood-Type Dishwasher
- VISIOTRONIC control: single button control with remaining time indicator together with text and graphic display.
- SENSO-ACTIVE resource management: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result.
- Exhaust energy storage: the fully enclosed 4-sided hood keeps steam and energy inside the system: energy saving up to 3 kW, less humidity in the kitchen area and better hygienic conditions.
- CLIP-IN wash and rinse arms: wash and rinse arms can be removed with one hand and without any tools.
- GENIUS-X² fine filter system: advanced filter system with prewash function reduces detergent consumption up to 35%.
- ROTOR-X wash system: separate rotating upper & lower 4-spoke wash arms deliver dynamic wash power .
- VAPOSTOP (optional): prevents vapour escapingfrom the machine when the hood is opened.
- Intelligent energy management: the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced.
- Interlocked strainer: prevents operation without tank strainer.
- EASY-CLEAN concept: blue markings in the machine help the operator to identify the components which require cleaning.
Description:
- Hood-type dishwasher for straight through or corner operation
- Nominal capacity up to 70 racks/h or 1,260 plates/h or 2,520 glasses/h
- 6 automatic cycles: short, standard, intensive, starch-removal, permanent, hygiene
- Multi-Setting: booster capacity may be reduced from 12.4 kW to 6.2 kW if connected with hot water
- Heat and noise insulated hood
- Strainer soil sensor
- Refill signal (detergent / rinse aid)
- Self-cleaning programme
- USB-interface for comfortable download of operational data
- Ready to install - completely equipped: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
- Tank, frame, wash / rinse arms and panels are stainless steel 1,4301
- 2 plate rack P-18-12
- 1 universal flat rack B-00-07
- 1 plastic cutlery rack CB8
Technical data
| Cycle times* | 52 / 75 / 180 sec. and special cycles |
| Water consumption | 2 l/rack |
| Tank capacity | 40 l |
| Tank heating | 2.5 kW |
| Power supply | 400 / 50 / 3N |
| Booster loading - Standard | 12.4 kW |
| Booster loading - Alternative | 6.2 kW |
| Total loading - Standard | 16.3 | 3 x 32 A |
| Total loading - Alternative | 10.1 | 3 x 25 A |
| Wash pump | 1.1 kW |
| Rack size | 500 x 500 mm |
| Loading height | 440 mm |
| Noise level | 67 dB (A) |
| Weight (gross / net) | 133 / 113 kg |
*Thermostop guarantees required temperatures with cold water, the actual cycle times extend accordingly.
For corner operation we recommend to make the right side of the machine accessible for service.
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water softener or a HOBART HYDROLINE water treatment system.
How can we help you?